CTS3000 Crown Amplifier CTs 3000 PIP2-compatible

CTS3000 Crown Amplifier CTs 3000 PIP2-compatible

Crown’s CTs Series amplifiers provide exceptional performance, flexibility and value for installed sound applications. CTs Series amplifiers feature independent selection of high and low impedance operation for a specific channel, plus power levels and features that were carefully chosen to match the requirements of fixed install design. Easy integration with HiQnet and CobraNet allows CTs amplifiers to deliver a comprehensive lineup of monitoring and control features along with digital audio transport for an award-winning digital audio solution.

Performance:

• Frequency Response (at 1 watt, 20 Hz - 20 kHz): ± 0.25 dB
• Signal to Noise Ratio below rated power (20 Hz to 20 kHz): < 105 dB
• Total Harmonic Distortion (THD) at 1 watt, from 20 Hz to 20 kHz: < 0.35%
• Intermodulation Distortion (IMD) 60 Hz and 7 kHz at 4:1, from –40 dB to full rated power: < 0.35%
• Damping Factor: 10 Hz to 100 Hz: > 3000
• Crosstalk (below rated power, 20 Hz to 1 kHz): > 80 dB
• Common Mode Rejection (CMR) (20 Hz to 1 kHz): > 50 dB
• DC Output Offset (Shorted input): < 2 mV

See detailed description for more info.

CTS3000 Crown Amplifier CTs 3000 PIP2-compatible

Crown’s CTs Series amplifiers provide exceptional performance, flexibility and value for installed sound applications. CTs Series amplifiers feature independent selection of high and low impedance operation for a specific channel, plus power levels and features that were carefully chosen to match the requirements of fixed install design. Easy integration with HiQnet and CobraNet allows CTs amplifiers to deliver a comprehensive lineup of monitoring and control features along with digital audio transport for an award-winning digital audio solution.

Performance:

• Frequency Response (at 1 watt, 20 Hz - 20 kHz): ± 0.25 dB
• Signal to Noise Ratio below rated power (20 Hz to 20 kHz): < 105 dB
• Total Harmonic Distortion (THD) at 1 watt, from 20 Hz to 20 kHz: < 0.35%
• Intermodulation Distortion (IMD) 60 Hz and 7 kHz at 4:1, from –40 dB to full rated power: < 0.35%
• Damping Factor: 10 Hz to 100 Hz: > 3000
• Crosstalk (below rated power, 20 Hz to 1 kHz): > 80 dB
• Common Mode Rejection (CMR) (20 Hz to 1 kHz): > 50 dB
• DC Output Offset (Shorted input): < 2 mV
• Input Impedance nominally balanced, nominally unbalanced: 10 kilohms, 5 kilohms
• Maximum Input Level
  Before input compression: +20 dBu
  Absolute maximum: + 32 dBu
• Load Impedance (Note: Safe with all types of loads)
  Stereo: 2, 4, 8, 16 ohms, 70V, and 100V
• Bridge Mono: 4, 8, 16, 100V, 140V and 200V
• Voltage Gain (at maximum level setting)
  8/4 Ohm Operation: 71.4:1 (37 dB)
  26 Db: 20:1 (26 dB)
  70V Operation: 50:1 (34 dB)
  100V Operation: 50:1 (34 dB)
• Required AC Mains (+15%, – 25%): 120V/60 Hz, 230V/50 Hz
• Power Draw at Idle (120VAC mains): 35W (Standby Mode)
• Cooling: Continuously variable speed forced air, front-to-back airflow
• Dimensions: Width, Height, Depth: 19 in. (48.3 cm) W x 5.25 in. (13.3 cm) H
  x 16.25 in. (41.3 cm) D
• Net Weight: 27.7 lb (12.6 kg)

Shipping Weight: 32.7 lb (14.8 kg) 

NEW IN BOX, WITH FACTORY WARRANTY