Search Results

CTS-2000 Power Amplifier CTS2000 Amp CTS Crown Audio

Of the Com-Tech. Series, Crown's CTs Series offers new flexibility and value for installed sound applications. The Com-Tech Series were the first to offer independent selection of high- and low-impedance operation for a specific channel, and CTs Series amplifiers continue that tradition, with power levels and features carefully chosen to perfectly integrate into fixed install design requirements.

CTS1200 Commercial Power Amplifier Crown Audio

The Crown CTs-1200 is a 2-Channel power amplifier housed in a 2-space rack mount frame, offering power levels and features meant to serve fixed installation sound applications. This amplifier is notable for a completely independent array of switches and indicators for each channel, including high and low impedance operation, input sensitivity, high pass filters, and an advanced level of well designed overload protection circuitry.

Features:

• High-power, 2-channel, 2U rack mount amplifier for installed sound applications
• Switching power supply lowers overall amplifier weight
• Direct 70V/100V/140V/200V constant-voltage or 2/4/8 Ohm low-impedance operation
• Independently selectable Input Sensitivity switching per channel
• Rear panel Programmable Input Processor(PIP2) connector accepts accessory expansion modules for specific custom installation requirements
• Thermal Level Control(TLC) circuitry protects amplifier from overheating; engages input compressor, dynamically reducing input gain when individual channels overheat
• Junction Temperature Simulation(JTS) quick-activation circuitry limits drive level of output devices to tolerable range if excess power is required; protects output transistors without shutting down channel
• Continuously variable fan cooling; venting with front-to-rear forced airflow
• Removable balanced terminal block input connectors with "Y" switch
• Switchable high pass filter per channel, eliminates step down transformer saturation in distributed systems
• Complete array of front panel function and warning indicator LED's for each channel
• Complete array of rear panel function and filter switches
• Power on indicator flashes when AC mains are under or over voltage
• Advanced protection circuitry covers shorted outputs, DC, mismatched loads, overheating, high frequency overloads, voltage fluctuation and internal faults.

See detailed description for more info.

CTS3000 Crown Amplifier CTs 3000 PIP2-compatible

Crown’s CTs Series amplifiers provide exceptional performance, flexibility and value for installed sound applications. CTs Series amplifiers feature independent selection of high and low impedance operation for a specific channel, plus power levels and features that were carefully chosen to match the requirements of fixed install design. Easy integration with HiQnet and CobraNet allows CTs amplifiers to deliver a comprehensive lineup of monitoring and control features along with digital audio transport for an award-winning digital audio solution.

Performance:

• Frequency Response (at 1 watt, 20 Hz - 20 kHz): ± 0.25 dB
• Signal to Noise Ratio below rated power (20 Hz to 20 kHz): < 105 dB
• Total Harmonic Distortion (THD) at 1 watt, from 20 Hz to 20 kHz: < 0.35%
• Intermodulation Distortion (IMD) 60 Hz and 7 kHz at 4:1, from –40 dB to full rated power: < 0.35%
• Damping Factor: 10 Hz to 100 Hz: > 3000
• Crosstalk (below rated power, 20 Hz to 1 kHz): > 80 dB
• Common Mode Rejection (CMR) (20 Hz to 1 kHz): > 50 dB
• DC Output Offset (Shorted input): < 2 mV

See detailed description for more info.

CTS4200A Crown Power Amplifier

The Crown-Audio CTs 4200 is a 4-channel power amplifier housed in a 2RU rack, offering 190 watts per channel at 8 ohms, designed for fixed installation use.

This amplifier features multiple simultaneous channel operation modes, 70 volt and 100 volt support, a switching power supply, and a variable speed fan cooling system. There is a comprehensive set of front panel indicators for each channel, along with advanced, well-designed thermal protection and fault isolation circuitry. The rear panel offers individual channel level trim controls, and 4-position operating mode switches.

The CTs 4200 offers a progressive design and advanced features for a moderate price per channel, and represents a viable solution for budget-conscious commercial, theatrical, educational, and houses of worship installations.

Features:

·         4-channel installation power amplifier in 3 RU rack mount enclosure with 180W of power per channel at 8 ohms

·         Crown switching power supply for reduced weight

·         Selectable constant voltage 70V/100V or 4/8 ohm low impedance operation per channel pair with dedicated 4-position switches

·         Multi Mode output topology allows for simultaneous dual and bridged operation

·         FIT(Fault Isolation Topology) circuitry isolates faulty channels; adjacent channels remain unaffected

·         TLC thermal protection circuitry engages internal channel compressor, dynamically reduces amplifier gain to reduce heat levels and prevent overheating

·         Front-to-rear forced airflow cooling vents, continuously variable speed fan cooling

·         Automatically inserted 35 Hz high-pass filter for channel pair in 70/100V operation

·         Advanced protection circuitry includes guards against shorted outputs, open circuits, mismatched loads, general overheating, DC, under/over voltage, high frequency overloads and internal faults

·         Comprehensive front panel indicator array includes individual channel LEDs for Bridge, Ready, Signal, Clip, Thermal and Fault; dedicated Power and Data indicators

·         Blue power indicator LED flashes when amplifier shuts down during under/over voltage condition on AC mains

See detailed description for more info.

CTS600 Crown 2U rackmount Power amplifier 300 Watts

The Crown CTs-600 is a two-channel power amplifier housed in a 2RU rackmount frame, offering power levels and features meant to serve fixed installation sound applications. This amplifier is notable for a completely independent array of switches and indicators for each channel, including high and low impedance operation, input sensitivity, high pass filters, and an advanced level of well designed overload protection circuitry.

Features:

·         High-power, 2-channel, 2U rackmount amplifier for installed sound applications

·         Switching power supply lowers overall amplifier weight

·         Direct 70V/100V/140V/200V constant-voltage or 2/4/8 Ohm low-impedance operation

·         Independently selectable Input Sensitivity switching per channel

·         Rear panel Programmable Input Processor (PIP2) connector accepts accessory expansion modules for specific custom installation requirements

·         Thermal Level Control (TLC) circuitry protects amplifier from overheating; engages input compressor, dynamically reducing input gain when individual channels overheat

·         Junction Temperature Simulation (JTS) quick-activation circuitry limits drive level of output devices to tolerable range if excess power is required; protects output transistors without shutting down channel

·         Continuously variable fan cooling; venting with front-to-rear forced airflow

·         Removable balanced terminal block input connectors with "Y" switch

·         Switchable high pass filter per channel, eliminates step down transformer saturation in distributed systems

·         Complete array of front panel function and warning indicator LED's for each channel

·         Complete array of rear panel function and filter switches

·         Power on indicator flashes when AC mains are under or over voltage

·         Advanced protection circuitry covers shorted outputs, DC, mismatched loads, overheating, high frequency overloads, voltage fluctuation and internal faults.

See detailed description for more info.

CTS600LITE Crown Audio CTS600 LITE Amplifier

The Crown CTs-600 is a 2-Channel power amplifier housed in a 2-space rackmount frame, offering power levels and features meant to serve fixed installation sound applications. This amplifier is notable for a completely independent array of switches and indicators for each channel, including high and low impedance operation, input sensitivity, high pass filters, and an advanced level of well designed overload protection circuitry. This unit includes a PIP-LITE module for networked controlling via either HiQnet and System Architect or TCP/IQ and IQwic.

Features:

• High-power, 2-channel, 2U rackmount amplifier for installed sound applications
• Switching power supply lowers overall amplifier weight
• Direct 70V/100V/140V/200V constant-voltage or 2/4/8 Ohm low-impedance operation
• Independently selectable Input Sensitivity switching per channel
• Rear panel Programmable Input Processor(PIP2) connector accepts accessory expansion modules for specific custom installation requirements
• Thermal Level Control(TLC) circuitry protects amplifier from overheating; engages input compressor, dynamically reducing input gain when individual channels overheat
• Junction Temperature Simulation(JTS) quick-activation circuitry limits drive level of output devices to tolerable range if excess power is required; protects output transistors without shutting down channel
• Continuously variable fan cooling; venting with front-to-rear forced airflow
• Removable balanced terminal block input connectors with "Y" switch
• Switchable high pass filter per channel, eliminates step down transformer saturation in distributed systems
• Complete array of front panel function and warning indicator LEDs for each channel
• Complete array of rear panel function and filter switches
• Power on indicator flashes when AC mains are under or over voltage
• Advanced protection circuitry covers shorted outputs, DC, mismatched loads, overheating, high frequency overloads, voltage fluctuation and internal faults.

See detailed description for more info.

CTS8200A Crown Amplifier 350 watt

350 Watt Channel Pair 8 Ohms Amp new

CTs 8200: MINIMUM GUARANTEED POWER (in watts, 0.1% THD) 120VAC, 60 Hz units

Crown’s CTs Series amplifiers provide exceptional performance, flexibility and value for installed sound applications. CTs Series amplifiers feature independent selection of high and low impedance operation for a specific channel, plus power levels and features that were carefully chosen to match the requirements of fixed install design. Easy integration with HiQnet and CobraNet allows CTs amplifiers to deliver a comprehensive lineup of monitoring and control features along with digital audio transport for an award-winning digital audio solution.

See detailed description for more info.

DSi1000 Crown Power Amplifier

The Crown DSi 1000 power amplifi er shall be a solid-state two-channel model

with a switch-mode universal power supply. A rear-panel HD-15 connector shall

provide input/output connectivity between the DSi amplifi er and the DSi-8M

System Monitor. The DSi 1000 shall be THX® approved.

The outputs shall be usable as stereo or bridged-mono modes of operation.

The bridged-mono mode shall bridge the outputs to provide increased output

voltage.