380395 INSULATION TESTER, HIGH VOLTAGE/120VAC

Digital High Voltage Insulation Tester, Wide Range Measurement up to 5kV With Insulation Resistance to 60GΩ

Features:

• Test Voltages of 500V, 1000V, 2500V, and 5000V
• Measure Insulation Resistance to 60GΩ
• Large 6000 count display with bargraph and backlight
• Polarization Index measurement (PI)
• Dielectric Absorption Ratio measurement (DAR)
• AC/DC Voltage measurement from 0 to 600V with Max/Min, Peak and Relative functions
• 1 to 15 minute timer function for IR measurements
• Resistance measurement
• Autoranging
• Indication of output voltage and discharge voltage
• Auto-discharge function and voltage output warning function
• Auto Power off and battery check
• Complete with test leads, 8 x C batteries, AC adaptor, and heavy duty carrying case

38056 High Resolution Milliohm Meter

Benchtop meter provides resolution down to 0.01m

Using 4-wire Kelvin clip test leads

Features:

• 7 ranges for wide low resistance measurements
• High resolution to 0.01m
• 1999 count display with 0.8" digits
• Automatic zero
• Built-in comparator for Hi/Lo/Go resistance testing or selection
• 5V test voltage
• One year warranty
• Complete with 4-wire cables with Kelvin clip connectors and power cord

380562 MILLIOHM METER

High Resolution Milliohm Meter. Bench-top meter provides resolution down to 0.01m Using 4-wire Kelvin clip test leads

Features:

• 7 ranges for wide low resistance measurements
• High resolution to 0.01m
• 1999 count display with 0.8" digits
• Automatic zero
• Built-in comparator for Hi/Lo/Go resistance testing or selection
• 5V test voltage
• One year warranty
• Complete with 4-wire cables with Kelvin clip connectors and power cord

380562-NIST MILLIOHM METER W/NIST

High Resolution Milliohm Meter. Bench-top meter provides resolution down to 0.01m Using 4-wire Kelvin clip test leads

Features:

• 7 ranges for wide low resistance measurements
• High resolution to 0.01m
• 1999 count display with 0.8" digits
• Automatic zero
• Built-in comparator for Hi/Lo/Go resistance testing or selection
• 5V test voltage
• One year warranty
• Complete with 4-wire cables with Kelvin clip connectors and power cord

380580 MILLIOHM METER

High accuracy, high resolution portable Milliohm Meter

Battery operated for field use

Features:

• Four terminal Kelvin measurements
• Over-temperature and over-voltage protection
• 5 ranges with 100μ max resolution
• Large 2000 count LCD display
• Auto-Hold and Auto power off
• Invalid test indicators prevent inaccurate measurements
• Built-in water resistant case with shoulder strap
• Complete with 8AA batteries, and 2 sets of test leads (4 wire with 4 alligator clips and 4 wire with 2 Kelvin alligator clips)

380580-NIST MILLIOHM METER W/NIST

High accuracy, high resolution portable Milliohm Meter

Battery operated for field use

Features:

• Four terminal Kelvin measurements
• Over-temperature and over-voltage protection
• 5 ranges with 100μ max resolution
• Large 2000 count LCD display
• Auto-Hold and Auto power off
• Invalid test indicators prevent inaccurate measurements
• Built-in water resistant case with shoulder strap
• Complete with 8AA batteries, and 2 sets of test leads (4 wire with 4 alligator clips and 4 wire with 2 Kelvin alligator clips)

380801 POWER ANALYZER

Compact, battery operated device for analyzing AC power loads

With PC interface plus datalogging

Features:

• Four simultaneous displays of Watts, Power Factor or VA, Voltage or Hz, Amps
• True RMS Voltage & Current measurements of sine, square, triangular and distorted wave forms with a crest factor < 5
• Max, Data Hold and Overload Protection
• Battery or AC adaptor provides line isolation
• Plug device to be tested directly into the Power Analyzer
• Sampling (update) rate is 2.5 times/second
• Windows 95/98/NT/2000/XP/ME software allows user to download stored data or save data directly, and to create an ASCII file. Computations include phase angle, apparent and reactive power, consumption and cost, and power factor correction
• Complete with Windows compatible software, cable, 8 x AA batteries, power cord, 117 VAC adaptor and case

380801-NIST POWER ANALYZER W/NIST

Compact, battery operated device for analyzing AC power loads

With PC interface plus datalogging

Features:

• Four simultaneous displays of Watts, Power Factor or VA, Voltage or Hz, Amps
• True RMS Voltage & Current measurements of sine, square, triangular and distorted wave forms with a crest factor < 5
• Max, Data Hold and Overload Protection
• Battery or AC adaptor provides line isolation
• Plug device to be tested directly into the Power Analyzer
• Sampling (update) rate is 2.5 times/second
• Windows 95/98/NT/2000/XP/ME software allows user to download stored data or save data directly, and to create an ASCII file. Computations include phase angle, apparent and reactive power, consumption and cost, and power factor correction
• Complete with Windows compatible software, cable, 8 x AA batteries, power cord, 117 VAC adaptor and case

380803 POWER ANALYZER

Appliance Tester/Power Analyzer

Compact, battery operated device for analyzing AC power loads

With PC interface plus datalogging

Features:

• Four simultaneous displays of Watts, Power Factor or VA, Voltage or Hz, Amps
• True RMS Voltage & Current measurements of sine, square, triangular and distorted wave forms with a crest factor < 5
• Max, Data Hold and Overload Protection
• Battery or AC adaptor provides line isolation
• Plug device to be tested directly into the Power Analyzer
• Sampling (update) rate is 2.5 times/second
• Windows® 95/98/NT/2000/XP/ME software allows user to download stored data or save data directly, and to create an ASCII file. Computations include phase angle, apparent and reactive power, consumption and cost, and power factor correction
• Complete with Windows compatible software, cable, 8 x AA batteries, power cord, 117 VAC adaptor and case

380803-NIST POWER ANALYZER W/NIST

Appliance Tester/Power Analyzer

Compact, battery operated device for analyzing AC power loads

With PC interface plus datalogging

Features:

• Four simultaneous displays of Watts, Power Factor or VA, Voltage or Hz, Amps
• True RMS Voltage & Current measurements of sine, square, triangular and distorted wave forms with a crest factor < 5
• Max, Data Hold and Overload Protection
• Battery or AC adaptor provides line isolation
• Plug device to be tested directly into the Power Analyzer
• Sampling (update) rate is 2.5 times/second
• Windows® 95/98/NT/2000/XP/ME software allows user to download stored data or save data directly, and to create an ASCII file. Computations include phase angle, apparent and reactive power, consumption and cost, and power factor correction
• Complete with Windows compatible software, cable, 8 x AA batteries, power cord, 117 VAC adaptor and case

380820 UNIVERSAL AC POWER SOURCE/ANALYZER

Front (100W) and Rear (2000W) Universal Output Sockets

For High Resolution Power testing to 10mW

Features:

• Low Power, high resolution front panel output with variable voltage and frequency
• HighPower rear panel output supplies line frequency and voltage
• Low Power Measurement (10mW to 100W) for testing power consumption of small devices or standby power at different voltages and frequencies
• High Power Measurement with Harmonics measurements 100mW to 1000W @ 110V or 100mW to 2000W @ 220V
• Power Quality Measurement (Watts, Power Factor, Voltage, Current, Harmonics)
• Cost Function calculates cost per day, month, and year
• 99 memory locations for preset voltage and frequency output settings
• Standby and Operation button
• User-programmable Over Current Protection (current limiting)
• Programmable through the built-in RS-232 interface
• Data acquisition mode captures readings to your PC with a user-programmable sampling rate of 2 to 65,535 seconds
• Complete with AC power cord, RS-232 to USB cable and software

382068 POWER CLAMP KIT

1000A AC/DC Clamp-on Power Datalogger Kit

Datalogs up to 4000 readings capture data and transfer to a PC for analysis and report generation

Features:

• 1000A Clamp measures single f (phase) or 3f power to 600kW

• Display True Power, Apparent Power, Power Factor, True RMS Voltage and Current, Resistance and Frequency

• Dual display of kW+PF, kVA+PF, V+A, A+Hz or V+Hz

• Clamp jaws open to 1.8" (46mm)

• Built-in recorder datalogs up to 4000 readings or download to a PC

• 25 point data memory viewable on the LCD display

• Data Hold and Auto power off

• Full function display on large 4-digit LCD with fast 40 seg. bargraph, Peak Hold, and MIN/MAX

• Complete with Clamp-on Meter, 9V battery, alligator clips, test leads, Datalogger/RS-232 module, PC software with cable, and case

382068-NIST POWER CLAMP KIT W/NIST

1000A AC/DC Clamp-on Power Datalogger Kit

Datalogs up to 4000 readings capture data and transfer to a PC for analysis and report generation

Features:

• 1000A Clamp measures single f (phase) or 3f power to 600kW

• Display True Power, Apparent Power, Power Factor, True RMS Voltage and Current, Resistance and Frequency

• Dual display of kW+PF, kVA+PF, V+A, A+Hz or V+Hz

• Clamp jaws open to 1.8" (46mm)

• Built-in recorder datalogs up to 4000 readings or download to a PC

• 25 point data memory viewable on the LCD display

• Data Hold and Auto power off

• Full function display on large 4-digit LCD with fast 40 seg. bargraph, Peak Hold, and MIN/MAX

• Complete with Clamp-on Meter, 9V battery, alligator clips, test leads, Datalogger/RS-232 module, PC software with cable, and case

382075 CLAMP METER, POWER 3-PHASE ANALYZER

3-Phase True RMS Clamp-On Power Analyzer Measures, computes, and displays 3-Phase Power On 3- and 4-wire Balanced or Unbalanced Loads

Features:

• 4-Digit 9999 count dual display LCD
• Clamp jaws open to 2.2" (55mm) for 1000MCM conductors
• Measures True Power (AC, DC)
• Measures Reactive(KVAR), and Apparent(KVA) Power to 1200KW
• Display Lead/Lag Current/Voltage phase shift in degrees
• Store and recall last four measurements
• Basic Measurements: Watts, Volts, Amps, and Frequency
• Advanced: KVA, KVAR, power factor, and phase angle
• Wide ranges to 1200kW, 600VAC, 800VDC, and 2000A
• Display Lead/Lag Current/Voltage phase shift in degrees
• Store/recall last 4 readings
• DC Current Auto-Zero
• Dual displays: kW+PF, kVA+kVAR, phase angle + Hz, Volts + Hz, or Amps + Hz
• Advanced Relative and Min/Max functions
• Data Hold
• Complete with test leads, carrying case, and 9V battery

382075-NIST POWER CLAMP METER W/NIST

3-Phase True RMS Clamp-On Power Analyzer Measures, computes, and displays 3-Phase Power On 3- and 4-wire Balanced or Unbalanced Loads

Features:

• 4-Digit 9999 count dual display LCD
• Clamp jaws open to 2.2" (55mm) for 1000MCM conductors
• Measures True Power (AC, DC)
• Measures Reactive(KVAR), and Apparent(KVA) Power to 1200KW
• Display Lead/Lag Current/Voltage phase shift in degrees
• Store and recall last four measurements
• Basic Measurements: Watts, Volts, Amps, and Frequency
• Advanced: KVA, KVAR, power factor, and phase angle
• Wide ranges to 1200kW, 600VAC, 800VDC, and 2000A
• Display Lead/Lag Current/Voltage phase shift in degrees
• Store/recall last 4 readings
• DC Current Auto-Zero
• Dual displays: kW+PF, kVA+kVAR, phase angle + Hz, Volts + Hz, or Amps + Hz
• Advanced Relative and Min/Max functions
• Data Hold
• Complete with test leads, carrying case, and 9V battery

1000A 3-Phase Power Analyzer/Datalogger

Four clamps with simultaneous display

On single phase, 3-phase/3-wire or 3-phase/4-wire systems

Features:

• Large backlighting LCD displays 10 parameters simultaneously (kW, kVAR, kVA, PF plus the voltage and current of the 3 phases)
• Up to four current probes can be connected to the analyzer
• Clamp-on True RMS power measurements with software for Harmonics analysis
• Displays Active Power (kW), Apparent Power (kVA), Reactive Power (kVAR) and Power Factor
• Current measurements to 1000A and Voltage measurements to 600V kWH, kVARh and kVAh energy measurements
• Automatically logs up to 20,000 sets of measurements and manually logs up to 99 sets
• Programmable Start/Stop datalogging times

1yr warranty

See detailed description for more info.

382091: 1000A 3-Phase Power Analyzer/Datalogger (50 Hz)

Four clamps for power measurements on single phase, 3-phase/3-wire or 3-phase/4-wire systems

Features:

• Large backlighting LCD display
• Displays 10 parameters simultaneously (kW, kVAR, kVA, PF plus the voltage and current of the three phases)
• Clamp-on True RMS power measurements with software for Harmonics analysis
• Current measurements to 1000A and Voltage measurements to 600V
• Automatically logs up to 20,000 sets of measurements and manually logs up to 99 sets

3-Phase Power & Harmonics Analyzer (110V)

Power measurements and analysis of single and 3-phase/3-wire or 3-phase/4-wire systems

Features:

• Large backlighting LCD displays up to 35 parameters in one screen
• Clamp-on True RMS power measurements with on-screen Harmonics display
• Simultaneous display of Harmonics and Waveform
• Display of Waveform with Peak Values (1024 samples/period)
• Analysis of Total Harmonic Distortion (THD-F)
• Maximum Demand (MDkW, MW, kVA, MVA) with programmable period

See detailed description for more info.

3-Phase Power & Harmonics Analyzer (220V)

Power measurements and analysis of single and 3-phase/3-wire or 3-phase/4-wire systems

Features:

• Large backlighting LCD displays up to 35 parameters in one screen
• Clamp-on True RMS power measurements with on-screen Harmonics display
• Simultaneous display of Harmonics and Waveform
• Display of Waveform with Peak Values (1024 samples/period)
• Analysis of Total Harmonic Distortion (THD-F)
• Maximum Demand (MDkW, MW, kVA, MVA) with programmable period

See detailed description for more info.

382098 3000A Flexible Current Clamp Probes

Set of 3 Flexible AC Probes - 24" (610mm) long for wrapping around busbars

Features:

• 24" (610mm) long
• 3000A Max Current

1200A 3-Phase Power Analyzer/Datalogger

Saves data on an SD card in Excel® format

For easy transfer to a PC for analysis

Features:

• Large dot-matrix, sun-readable, numerical, backlit LCD
• Full system analysis with up to 35 parameters
• V (phase-to-phase), V (phase-to-ground)
• A (phase-to-ground)
• KW / KVA / KVAR / PF (phase)
• KW / KVA / KVAR / PF (system)
• KWH / KVAH / KVARH / PFH (system)
• Phase angle
• High accuracy auto-ranging current clamps
• (0.2A to 1200A)
• 600.0VAC input with CAT III-600V safety rating

See detailed description for more info.