40-671 Ball Plunger Normally Open normally close switch new

SPST 1 AMP @ 12 VOLTS DC PLUNGER ON-(OFF) or OFF-(ON) SWITCH-INCLUDES A 5/8" DIAMETER CHROME METAL BALL PLUNGER WITH WIRE LEADS-MOUNTS IN A 3/4" DIAMETER HOLE

7105J1APE2

PART # ED22EQZ16J5017CK                        

Switch, SMALL Rocker W/BEZEL, SPDT, MOM.-OFF-MOM., 5A@120VAC OR 28VDC; 2A@250VAC

BZ-2RQ1-A2 large overtravel plunger SPDT switch 15a, 125, 250 or 480 VAC new

MICRO SWITCH BZ/BA Series standard basic switches are used for simple or precision on/off application needs.

BZ Series Standard Basic Switch, Single Pole Double Throw Circuitry, 15 A at 125 Vac, Overtravel Plunger Actuator, 2, 5 N - 3, 61 N [9 oz - 13 oz] Operating Force, Silver Contacts, Screw Termination, CE, CSA, DEMKO.

Features:

• Accepted world-wide standard "Large Basic" switch
• Low operating force and differential travel
• Long mechanical life up to 20,000,000 cycles at 95% survival
• Elongated mounting hole for easier, more accurate mounting
• Current rating ranges from 15 A to 25 A
• Choice of actuation, termination and operating characteristics

BZ2RQ18A2 rollover plunger SPDT switch 15 a 125-480VAC new

MICRO SWITCH BZ/BA Series standard basic switches are used for simple or precision on/off application needs.

BZ Series Standard Basic Switch, Single Pole Double Throw Circuitry, 15 A at 125 Vac, Overtravel Plunger Actuator, 2, 5 N - 3, 61 N [9 oz - 13 oz] Operating Force, Silver Contacts, Screw Termination, CE, CSA, DEMKO.

Features:

• Accepted world-wide standard "Large Basic" switch
• Low operating force and differential travel
• Long mechanical life up to 20,000,000 cycles at 95% survival
• Elongated mounting hole for easier, more accurate mounting
• Current rating ranges from 15 A to 25 A
• Choice of actuation, termination and operating characteristics

MT-1 exit release timer 12-24v ac/dc normally open trigger MT1 new

Specifications:

• VOLTAGE RANGE: 12 TO 24 VOLTS AC OR DC
• CURRENT DRAW: 37 MA.
• RELAY OPERATING MODE: ONE SHOT
• CONTACT ARRANGEMENT: SINGLE POLE-DOUBLE THROW
• CONTACT RATING: 2 A. @ 35 VDC/125 VAC
• TIME SETTING: ADJUSTABLE FROM TWO TO 45 SECONDS
• TEMPERATURE RATING: -25C TO +70C
• MOUNTING: ADHESIVE FOAM TAPE
• SIZE: 1.75” x 1.75”

MT-2 exit release timer 12-24v ac/dc power on trigger MT2 new

Specifications:

• VOLTAGE RANGE: 12 TO 24 VOLTS AC OR DC
• CURRENT DRAW: 37 MA.
• RELAY OPERATING MODE: ONE SHOT
• CONTACT ARRANGEMENT: SINGLE POLE-DOUBLE THROW
• CONTACT RATING: 2 A. @ 35 VDC/125 VAC
• TIME SETTING: PRE-SET AT 10,20 AND 30 SECONDS
• PIEZO OUTPUT FOR A REMOTE AUDIBLE SIGNAL
• THREE TRIGGER INPUTS, N/O, N/C AND A VOLTAGE INPUT
• TEMPERATURE RATING: -25C TO +70C
• MOUNTING: ADHESIVE FOAM TAPE
• SIZE: 1.75” x 1.75”

ROLLER BALL - PLUNGER CONTACT RB-01T

G.R.I.’s Roller Ball switch is a unique application of the magnetic reed, combining into a single package mechanical plunger action and the reliability of a hermetically sealed switch.

The ball plunger can be activated from any direction within 360 degrees, using a sliding motion such as that produced by the opening or closing of a door or window into its frame. But they also have been used very effectively as an interior trap device by mounting on a flat surface, such as a display table, and placing the protected object directly on the switch to conceal and actuate the roller ball.

G.R.I. Roller Ball switches can work when nothing else will. Spacers and mounting hardware are included with switch and also available separately. The terminal version is indicated by the addition of “T” after the part number. Not recommended for the bottom track of doors or windows.