12-105 Waldom continuity tester 12105

Gc precision tools fill diverse needs for technicians, designers, hobbyist and quality assurance professionals. Always insist on GC quality products for greater accuracy when repairing, adjusting or designing electronics.

Features:

• Use to determine fault in a circuit
• 42" alligator clip for ground connections
• Clip lead to circuit and use needle point to test
• Light “on” indicates circuit continuity
• Light “off” indicates fault in circuit
• Requires two “AA” batteries (not included)

Simpson 260® Series 8P

Analog - VOM

Volt-Ohm-Milliammeter

Simpson Catalog Number 12391

BR100: Video Borescope Inspection Camera

17mm camera diameter and 2.4" Color TFT LCD Monitor

Features:

• 17mm diameter camera head with 39" (1m) flexible gooseneck cable retains configured shape
• Mini water-proof (IP67) camera head for high resolution viewing
• Two bright LED lamps with dimmer to illuminate viewed object
• Glare-free close-up field of view
• Display detaches for easy storage
• Optional but not included  BR200-EXT extension cable available for increasing viewing depth (maximum 2 extension cables can be connected to the borescope)
• Complete with 4 AA batteries, extension tools (mirror, hook, magnet), video output jack, and hard case

PART# ED064IPTTP

 NEW IN BOX , WITH FACTORY WARRANTY 

Dual Channel, 20MHz Oscillscope with True RMS DMM.

Technicians appreciate the bright backlight of the 3" x 3" cold cathode                    flourescent  display and rugged construction inside and out.

New with this unit

• Cursor Readout

• Decibels

• Pre and Post Triggering

• cULus 3111

Included:

Two Test Leads, two Banana to

BNC Adapters, one DC-60 MHz x 1 x 10 Passive Oscilloscope Probe, Power Supply and Instruction Manual

Features:

20 MHz Bandwidth

Capture signals from AC/DC drive motors, sensors, actuators, line and control voltages, UPS and industrial machines.

Cursor Readout

Measure the width and amplitude of the signal and display it on the screen instead of trying to figure it out manually.

Decibels

Accurately measure sound signals.

Pre and Post Triggering

View the waveform before and after the point the scope triggers at to find glitches and other anomalies with the signal.

Trend Mode

Graph readings over a predetermined time period to check for surges or dropouts.

Dual Input

View two waveforms on the display for comparison and troubleshooting.

True RMS DMM

Measure AC/DC volts up to 600V, frequency to 20 MHz, and resistance to 20 Meg ohm. Obtain accurate measurements of non-sinusoidal AC voltage and current waveforms found in controls and circuits with True RMS.

Real Time Sample Rate

Capture spikes and dropouts of industrial signals with real time sampling of 25 megasamples per second.

 NEW IN BOX, WITH FACTORY WARRANTY

SDL400 Light Meter/Datalogger

Records data on an SD card in Excel format for easy transfer to a PC for analysis

Features:

• Wide range to 10,000Fc or 100kLux
• Cosine and color-corrected measurements
• Utilizes precision silicon photo diode and spectral response filter
• Datalogger date/time stamps and stores readings on an SD card in Excel format for easy transfer to a PC
• Offset adjustment used for zero function to make relative measurements
• Adjustable data sampling rate: 1 to 3600 seconds
• Stores 99 readings manually and 20M readings via 2G SD card
• Type K/J Thermocouple input for high temperature measurements
• Large backlit LCD display

SDL400 Light Meter/Datalogger + FREE 407732 Dual Range Sound Level Meter

SPECIAL OFFER 02-01-12 TO 03-31-12

SDL400:

Records data on an SD card in Excel format for easy transfer to a PC for analysis

407732:

Two range meter with backlit LCD display

Digital Display Signal Level Meter/Spectrum Analyzer, CATV/Off-Air

The ST5128 hand-held field strength meter uses RF signal processing techniques and microprocessor technology to produce quick and accurate signal measurements. The meter provides the user a choice of viewing individual channel power readings, a single channel spectrum, a multiple channel spectrum, or an all channel spectrum. Automatic internal calibration corrects for measurement variations due to frequency response, temperature changes, and internal attenuator settings. The combination of keypad tuning and menu driven displays allow for simple operation to get needed signal measurements.

The meter is programmed with both USA CATV and VHF/UHF NTSC standard formats. Users can also select specific frequencies for signal testing.

The back-lit LCD allows for viewing data measurements even in dark places.

See detailed description for more info.

VIR50 Digital InfraRed Video Thermometer

2.2" Color TFT LCD and Built-in 640 x 480 Camera with a microSD card for capturing images (JPEG) and video (3GP) for viewing on your PC.

Large 2.2" color video LCD displays measurement area with temperature/humidity, min/max/avg, date, and time stamp.

Upload images and videos to a PC or laptop for further analysis or use for report documentation.

Features:

• Dual laser indicates ideal measuring distance where the two laser points converge to a 1” target spot
• Fast 150 millisecond response time
• Color LED bargraph for viewing trends
• Type K Thermocouple input
• Air Temperature and Relative Humidity measurement
• Adjustable emissivity increases measurement accuracy for different surfaces
• Adjustable High/Low set points with audible alarm alerts user when temperature exceeds the programmed set points
• MAX/MIN/AVG/DIF functions
• Trigger lock function for continuous readings
• USB interface
• Auto power off
• Double molded housing
• Complete with microSD card, general purpose Type K bead wire probe, USB cable, rechargeable 3.7V battery, and carrying case

See detailed information for more info.