Quickly find your Aluminum Louver and price by typing in the opening size (inches, from 6"x6" to 60"x60") in the Search Window on left. (example 12"x24" or 12x24, use whole numbers, no spaces - fractions will be later). If one dimension is larger than 60" use closest foot to begin. example type: 7ftx8ft or 7'x8' (no spaces).

Look at sample close up photos by clicking on "Close Ups" under "BROWSE & SHOP" on the left side of this page

Click on the Home link in the upper right corner of any page for a general overview for our products!

Search Results

Found 10 product(s) for Docks and Gangways (1-10 of 10)

Docks and Gangways Aluminum Docks and Gangways. These are made from heavy duty aluminum extrusions. For instance, a standard 4 ft wide x 20 ft long dock weighs about 320 lbs (not including shipping weight for packaging). Compare that to the other guys. Docks with legs are made wihin 10 Days. Floats for floating docks may take longer. Call us at 772-223-9335 for a quote for your custom size.
	15Dock All Alum 4ft x 19 ft plus 5 ft with hinge All 6061-T6 marine grade aluminum dock 4 ft wide x 19 ft long with hinge attached 4 ft x 5 ft section. Dock has (6) welded 2"dia x 5" pipe attachments for 1-1/2" schedule 40 aluminum pipe for legs (alum for shallow water less than 6ft applications, use galvanized steel pipe for deeper water). Order leg pipe separately from us or buy locally yourself to save shipping cost. 16"x12" aluminum foot pads for bottom of legs are included. All hardware is marine grade18-8 stainless steel. Aluminum decking is welded in place except when using floats so it is easier to attach the floats. Optional wood or composite decking is available. The dock is made strong from welding structural extrusions. Call us at 772-223-9335 or email planbmanufacturing@att.net to get a quote for other sizes. Price: $3,325.00
	95AluminumDockonPilings Aluminum Dock on Pilings - typical layout. Aluminum dock with aluminum decking and hand rails. 5 foot wide example. Call us at 772-223-9335 and we will design and build your dock for shipment/pick up and install yourself or through a local contractor. Price: $0.00
	Catwalk-Aluminum Aluminum Catwalk from 16ft long x 1ft-3/8inch wide (specify length after clicking add to cart). Non-skid walking surface is flat across whole surface. A typical use is to attach to boat lift lifter beams. Catwalk properly attached to both lifter beams can cantilever past a beam by 7-1/2 ft. We will pre-drill mounting holes for 3/8" stainless steel hardware if you call and let us know the size and spacing of your lifter beams, as well as if you want the catwalk centered on the beams or specify otherwise. Standard aluminum mounting clips and stainless hardware to attach to I-Beams is included. No drilling I-Beams, very easy to install.  Call us at 772-223-9335 if you have questions or a different application. Freight charges are approximate and will be corrected and shown on your acknowledgement invoice sent within 1 day of order. (or call us for quote before order). You could also just come to our shop in Stuart, FL to pick up yourself to save cost of shipping. Price: $675.00
	Dock Components Major Components of standard dock or gangway. Optional wood decking would run crosswise and would be built with the supporting aluminum stringers running lengthwise on 16" centers. We will design what you need. Just call us at 772-223-9335. Price: $0.00
	Dock Foot Pads 16" x 12" example Aluminum Foot pads 16" x 12" typical. We can customize to handle slopes. Call for price. 772-223-9335 Price: $0.00
	Dock-Floats Optional Floats for floating aluminum dock applications. Call for prices. Price: $0.00
	Dock-HeavyWeldedHinge Heavy Duty Welded Hinge - example Price: $0.00
	Dock-WeldedLegAttachments Welded 2"dia x 5" pipe attachments for 1-1/2" schedule 40 pipe for legs Price: $0.00
	Ladder Rear Rungs and Temp Support Bolts Close up example of rear Catwalk Ladder Rungs and note the temporary bolts with double nuts so ladder can be easily positioned so you don't have to hold the weight of the ladder before drilling matching holes in the catwalk. (example photo only) Price: $0.00
	Ladder for catwalk Aluminum ladder for catwalk (not including catwalk). Do you have a boat lift, but find it difficult to get in the boat? A boat lift ladder will solve the problem. Choose from 3-step to 7-step ladders and get prices by clicking on photo. Very stable front 12-1/2" wide x 8" deep non-slip steps with 9" rise per step. As shown in the example photo, the 5 step ladder's top step would be 45" vertical above the catwalk surface which is 5" high in the case of  our 16 ft catwalk (so top step at 50" above lifter beam). Rear support has ladder rungs that make it easy for the occational climb down to the rear. Easy to install with 3/8" stainless hardware included. Just attach the front steps to the rear steps, carry the ladder on to the catwalk and set down on the temporary bolts that were installed by us. Use a level for port and starboard leveling, then drill one hole per leg through to the catwalk, bolt to the catwalk and you are done. Freight charges are approximate and will be corrected and shown on your acknowledgement invoice sent within 1 day of order. (or call us for a quote before order at 772-223-9335). You could also just order ahead, then come to our shop in Stuart, FL to pick up yourself to save cost of shipping. We make these here, so call us if you need customization. Price: $520.00